EPSE QUALITY LABEL

For the EPSE Quality Label, a PC sheet must fulfil the following minimum EPSE Sheet Standard criteria:

1. The sheet is CE-marked according to EN 16153:2013+A1:2015.

2. The sheet is produced in accordance with ISO9000.

3. Covered warranty of 10+ years (weather-ability) and 5+ years (impact strength)

4. Yellowness index according to EN 16153, Clause 4.6.2. - ΔYI ≤ 8 units for uncoloured sheets.

5. Mass per unit area of the sheet according EN16153 clause 4.2 - see information brochure

Only EPSE members are authorised to use the EPSE Quality Label on their sheets. Thus, for a EPSE non-member, that wants to use the Quality Label, the following steps apply:

​

1. The non-member company has to apply for EPSE membership and be officially approved.

2. After approval, EPSE will check whether the company’s product fulfils the technical conditions outlined in the EPSE Sheet Standard to be labelled as EPSE quality.

3. If the check is positive, the company is allowed to use the EPSE Quality Label on its PC multiwall sheets. The Quality Label on the PC sheet has to be always displayed in combination with the company logo.

All EPSE members are agreeing on applying the EPSE Quality Label only on products that meet the above outlined criteria of the EPSE Sheet Standard. However, EPSE will internally ensure that this is followed by all member companies and in this way guarantee compliance of labelled products. In case an EPSE member suspects that a labelled product on the market from another EPSE member is not fulfilling the EPSE Sheet Standard, a specific procedure shall be followed including the testing of a minimum of three samples by an EPSE approved test authority and specific consequences for the EPSE member in case the quality standard of the product is indeed proven to not have been met.